Casing
- Double wall cabinet
- Configuration: Horizontal discharge
- Material: Galvanized 22GA
- Insulation: 1 in fibreglass
- Access door with ¼ turn handle
- Height: 40 3/8 in
- Width: 56 in
- Depth: 78 in
- Unit Weight: 925 lbs
- Shipping Weight: 975 lbs
- Mounting: Platform or suspended
Blowers
- Qty : 2
- Type : Twin, Forward curved, ball bearings, belt drive with adjustable pulleys
- Diameter: 9 in
- Width: 9 in
- Shaft: 1 in
- Motor : ODP, 1725 rpm, inverter duty 10:1
|
Plate Exchanger
- Polypropylene (sensible heat transfer)
Dimension: 21 in X 21 in X 19 3/8 in
Pitch: 4mm
Qty: 4
- Aluminum (sensible heat transfer)
Dimension: 19/8 in X 19 3/8 in X 19 3/8 in
Pitch: 4.2mm
Qty : 4
- Enthalpy (sensible and latent heat transfer)
Dimension: 21 in X 21 in X 19 3/8 in
Pitch: 4.5mm
Qty: 4
- High efficiency Enthalpy (sensible and latent heat transfer)
Dimension: 21 in X 21 in X 19 3/8 in
Pitch: 2.5mm
Qty: 4
Filters
- Qty : 4 supply, 4 exhaust
- Efficiency : MERV 7
- Dimensions : 20 in X 20 in X 2 in
|
Frost Control
For outside temperature below 23F, frost control required. Options available:
- pre-heating in the duct (by adjustable set point)
- evacuation only cycles (by adjustable set point, drain pan connections 1 in NPT, comes with isolated and motorize damper on fresh air intake)
Options
- Vertical discharge
- Prepeint 22 ga outside finish
- 115V/1ph/60Hz, 208V/1ph/60Hz, 208V/3ph/60Hz, 230V/1ph/60Hz, 230V/3ph/60Hz, 460V/3ph/60Hz,
575V/3ph/60Hz
- 24 Volts contactors for motors (single or double) with start/stop dry contact
- 24 Volts transformer for controls
- Roof curb (non-isolated)
- Disconnect (fused or non-fused)
- Electrical protections
- ETL certification
Warranty
Core – Limited ten-year warranty
All other covered components – Limited two-year warranty
|